184 lines
5.2 KiB
C
184 lines
5.2 KiB
C
#include "main.h"
|
|
#include "cmsis_os.h"
|
|
#include "filament.h"
|
|
#include "CPY_PROT/cpy_prot.h"
|
|
#include "Param/param.h"
|
|
|
|
extern TIM_HandleTypeDef htim1;
|
|
extern ADC_HandleTypeDef hadc1;
|
|
extern DMA_HandleTypeDef hdma_adc1;
|
|
|
|
static uint16_t gausAdcBuf[ADC_CHNL_NUM];
|
|
static uint16_t gusDuty = 0;
|
|
static uint16_t gusPreheatDuty = 0;
|
|
static uint16_t gusNormalDuty = 0;
|
|
|
|
uint8_t gucWorkState = 0;
|
|
|
|
static uint16_t gusPreheatCurrent = 0;
|
|
static uint16_t gusLimitCurrent = 0;
|
|
|
|
uint16_t gusFilamentCurrent = 0;
|
|
uint16_t gusFilamentVoltage = 0;
|
|
uint16_t gusXrayCurrent = 0;
|
|
|
|
uint16_t adc2voltage(uint16_t adcVal)
|
|
{
|
|
return adcVal * 3000 / 65535;
|
|
}
|
|
|
|
uint16_t adc2Iflla(uint16_t adcVal)
|
|
{
|
|
return adc2voltage(adcVal) * 1000 / 20 / 20;
|
|
}
|
|
|
|
uint16_t adc2Vflla(uint16_t adcVal)
|
|
{
|
|
return adc2voltage(adcVal) * 3;
|
|
}
|
|
|
|
uint16_t adc2Xray(uint16_t adcVal)
|
|
{
|
|
return adc2voltage(adcVal) * 1000 / 3 / 250;
|
|
}
|
|
|
|
void currentUpdate(void)
|
|
{
|
|
int iCurrent = gusFilamentCurrent;
|
|
int iXrayCurrent = gusXrayCurrent;
|
|
|
|
if (gucWorkState == 1) {
|
|
uint16_t usAimCurrent = gusPreheatCurrent;
|
|
if (iCurrent > usAimCurrent + 500) {
|
|
gusPreheatDuty -= 10;
|
|
} else if (iCurrent > usAimCurrent + 300) {
|
|
gusPreheatDuty -= 5;
|
|
} else if (iCurrent > usAimCurrent + 100) {
|
|
gusPreheatDuty -= 2;
|
|
} else if (iCurrent > usAimCurrent + 10) {
|
|
gusPreheatDuty -= 1;
|
|
} else if (iCurrent < usAimCurrent - 500) {
|
|
gusPreheatDuty += 10;
|
|
} else if (iCurrent < usAimCurrent - 300) {
|
|
gusPreheatDuty += 5;
|
|
} else if (iCurrent < usAimCurrent - 100) {
|
|
gusPreheatDuty += 2;
|
|
} else if (iCurrent < usAimCurrent - 10) {
|
|
gusPreheatDuty += 1;
|
|
}
|
|
gusDuty = gusPreheatDuty;
|
|
} else if (gucWorkState == 2) {
|
|
if (iCurrent > gusLimitCurrent + 200) {
|
|
gusNormalDuty -= 5;
|
|
} else if (iCurrent > gusLimitCurrent + 100) {
|
|
gusNormalDuty -= 2;
|
|
} else if (iCurrent > gusLimitCurrent) {
|
|
gusNormalDuty -= 1;
|
|
}
|
|
gusDuty = gusNormalDuty;
|
|
}
|
|
|
|
__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, gusDuty);
|
|
}
|
|
|
|
static void filamentThread(void *arg)
|
|
{
|
|
int iWorkCmd = 0;
|
|
int iCnt = 0;
|
|
|
|
loadSysParam();
|
|
if ((gptSysParam->usPreheatCurrent < 100) || (gptSysParam->usPreheatCurrent > 5000)) {
|
|
gusPreheatCurrent = 2000;
|
|
} else {
|
|
gusPreheatCurrent = gptSysParam->usPreheatCurrent;
|
|
}
|
|
if ((gptSysParam->usLimitCurrent < 100) || (gptSysParam->usLimitCurrent > 5000)) {
|
|
gusLimitCurrent = 3500;
|
|
} else {
|
|
gusLimitCurrent = gptSysParam->usLimitCurrent;
|
|
}
|
|
|
|
HAL_ADCEx_Calibration_Start(&hadc1, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED);
|
|
|
|
HAL_ADCEx_MultiModeStart_DMA(&hadc1, (uint32_t *)gausAdcBuf, ADC_CHNL_NUM);
|
|
|
|
debug("ADC_CHNL_NUM = %d\n", ADC_CHNL_NUM);
|
|
|
|
__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, 0);
|
|
|
|
HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_1);
|
|
|
|
HAL_TIMEx_PWMN_Start(&htim1, TIM_CHANNEL_1);
|
|
|
|
while (1) {
|
|
osDelay(1);
|
|
SCB_InvalidateDCache_by_Addr(gausAdcBuf, ADC_CHNL_NUM * sizeof(gausAdcBuf[0]));
|
|
|
|
gusXrayCurrent = adc2Xray(gausAdcBuf[0]);
|
|
gusFilamentCurrent = adc2Iflla(gausAdcBuf[1]);
|
|
gusFilamentVoltage = adc2Vflla(gausAdcBuf[2]);
|
|
|
|
if (gucWorkState != 0) {
|
|
if (HAL_GPIO_ReadPin(WORK_CMD_GPIO_Port, WORK_CMD_Pin) == GPIO_PIN_RESET) {
|
|
iWorkCmd++;
|
|
if (iWorkCmd > 3) {
|
|
iWorkCmd = 3;
|
|
if (gucWorkState == 1) {
|
|
gucWorkState = 2;
|
|
if (gusNormalDuty == 0) {
|
|
gusNormalDuty = gusPreheatDuty * 2;
|
|
}
|
|
gusDuty = gusNormalDuty;
|
|
__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, gusDuty);
|
|
osDelay(3);
|
|
}
|
|
}
|
|
} else {
|
|
iWorkCmd--;
|
|
if (iWorkCmd < 0) {
|
|
iWorkCmd = 0;
|
|
if (gucWorkState == 2) {
|
|
gucWorkState = 1;
|
|
gusDuty = gusPreheatDuty;
|
|
__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, gusDuty);
|
|
osDelay(3);
|
|
}
|
|
}
|
|
}
|
|
currentUpdate();
|
|
} else {
|
|
gusDuty = 0;
|
|
__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, gusDuty);
|
|
}
|
|
|
|
iCnt++;
|
|
|
|
if (iCnt < 1000) {
|
|
continue;
|
|
}
|
|
iCnt = 0;
|
|
|
|
printf("ADC: %d,%d,%d\n", gausAdcBuf[0], gausAdcBuf[1], gausAdcBuf[2]);
|
|
printf("duty:%d%%,I:%.3fA,V:%.2fV\n", gusDuty, gusFilamentCurrent/1000.0, gusFilamentVoltage/1000.0);
|
|
}
|
|
}
|
|
|
|
void filamentInit(void)
|
|
{
|
|
// 创建任务
|
|
const osThreadAttr_t filament_task_attributes = {
|
|
.name = "filament_task",
|
|
.stack_size = 4096 * 2,
|
|
.priority = (osPriority_t) osPriorityNormal,
|
|
};
|
|
if (osThreadNew(filamentThread, NULL, &filament_task_attributes) == NULL)
|
|
{
|
|
printf("failed to create filament_task\n");
|
|
}
|
|
else
|
|
{
|
|
printf("create filament_task success\n");
|
|
}
|
|
}
|
|
|