from PySide6.QtCore import * from datetime import datetime from config import * class DataCenter(QObject): plcAlive = Signal(bool) dataReady = Signal(dict) send_temperature_data = Signal(str, dict) readFinished = Signal() def __init__(self, parent=None): super().__init__(parent) self.settings = QSettings("TGZZ", "TGX") # 设置存储位置 self.temp_timer = QTimer(self) self.temp_timer.timeout.connect(self.update_temp_timer) self.debug_timer = QTimer(self) self.debug_timer.timeout.connect(self.update_debug_timer) if YSMODE: self.debug_timer.start(1000) self.temp_timer.start(1000) self.temp_data = {} self.device_object = { "scanner1":{ "acquisition_board":{ "temperature": 0 , "temperature_alarm_line": 0, "communication_status": 0, "failure_status": 1, "failure_info": "采集板故障", "usage_duration": 15, "useful_life": 365 }, "power":{ "voltage_value": 0, "voltage_setting_value": 0, "current_value": 0, "current_setting_value": 0, "filament_current_value": 0, "filament_current_setting_value": 0, "filament_preheating_current_value": 0, "filament_preheating_current_setting_value": 0, "communication_status": 0, "failure_status": 1, "failure_info": "电源故障", "enable_status": 0, "safety_lock": 0, "switch": 0, "temperature": 0, "temperature_alarm_line": 80, "usage_duration": 15, "useful_life": 365 }, "xray":{ "enable_status": 0, "oil_temperature": 0, "oil_temperature_alarm_line": 50, "liquid_level": 0, "usage_duration": 15, "useful_life": 365, "failure_status": 1, "failure_info": "射线故障" }, "motor":{ "communication_status": 0, "position": 0, "direction": 0, "velocity": 0, "setting_velocity": 0, "usage_duration": 15, "useful_life": 365, "failure_status": 1, "failure_info": "电机故障" } }, "scanner2":{ "acquisition_board":{ "temperature": 0 , "temperature_alarm_line": 0, "communication_status": 0, "failure_status": 1, "failure_info": "采集板故障", "usage_duration": 15, "useful_life": 365 }, "power":{ "voltage_value": 0, "voltage_setting_value": 0, "current_value": 0, "current_setting_value": 0, "filament_current_value": 0, "filament_current_setting_value": 0, "filament_preheating_current_value": 0, "filament_preheating_current_setting_value": 0, "communication_status": 0, "failure_status": 1, "failure_info": "电源故障", "enable_status": 0, "safety_lock": 0, "switch": 0, "temperature": 0, "temperature_alarm_line": 80, "usage_duration": 15, "useful_life": 365 }, "xray":{ "enable_status": 0, "oil_temperature": 0, "oil_temperature_alarm_line": 50, "liquid_level": 0, "usage_duration": 15, "useful_life": 365, "failure_status": 1, "failure_info": "射线故障" }, "motor":{ "communication_status": 0, "position": 0, "direction": 0, "velocity": 0, "setting_velocity": 0, "usage_duration": 15, "useful_life": 365, "failure_status": 1, "failure_info": "电机故障" } }, "global_dev":{ "device":{ "cw_flow_rate": 0, "cw_flow_rate_lower_limit": 0, "custom_intvl": 0, "water_temperature": 0, "water_temperature_alarm_line": 50, "light": False, "outlet_air_temperature": 0, "outlet_air_temperature_alarm_line": 50, "control_board_temperature": 0, "control_board_temperature_alarm_line": 30, "failure_info": "通用设备故障1,2", "sports_mode": "fast" } } } def appendTempData(self, data1, data2, max_count=3600): dateTimeData = self.temp_data.get("datetime", []) scanner1data = self.temp_data.get("SCANNER1", []) scanner2data = self.temp_data.get("SCANNER2", []) timestamp = int(datetime.now().timestamp()) if len(dateTimeData) >= max_count: dateTimeData.pop(0) dateTimeData.append(timestamp) if len(scanner1data) >= max_count: scanner1data.pop(0) scanner1data.append(data1) if len(scanner2data) >= max_count: scanner2data.pop(0) scanner2data.append(data2) self.temp_data["SCANNER1"] = scanner1data self.temp_data["SCANNER2"] = scanner2data self.temp_data["datetime"] = dateTimeData self.temp_data["method"] = "temperature" def update_debug_timer(self): self.dataReady.emit(self.device_object) def update_temp_timer(self): data1 = self.device_object["scanner1"]["xray"]["oil_temperature"] data2 = self.device_object["scanner2"]["xray"]["oil_temperature"] self.appendTempData(data1, data2) @Slot(str, int) def get_temperature(self, cid, duration): self.send_temperature_data.emit(cid, self.temp_data) @Slot(int, dict) def update_voltage_info(self, voltage_index, info): self.device_object[f"scanner{voltage_index}"]["power"] = info self.dataReady.emit(self.device_object) @Slot(dict) def update_motor_globaldev_info(self, info): self.device_object[f"global_dev"]["device"]["sports_mode"] = info["sports_mode"] self.dataReady.emit(self.device_object) @Slot(dict) def update_globaldev_info(self, info): self.device_object[f"global_dev"] = info self.dataReady.emit(self.device_object) @Slot(int, dict) def update_xray_info(self, xray_index, info): self.device_object[f"scanner{xray_index}"]["xray"] = info self.dataReady.emit(self.device_object) @Slot(int, dict) def update_acquisition_info(self, acquisition_index, info): self.device_object[f"scanner{acquisition_index}"]["acquisition_board"]["temperature"] = info["temp"]/10 self.dataReady.emit(self.device_object) @Slot(int, dict) def update_motor_info(self, motor_index, info): self.device_object[f"scanner{motor_index}"]["motor"] = info self.dataReady.emit(self.device_object) @Slot(int, int) def update_motor_position(self, motor_index, position): self.device_object[f"scanner{motor_index}"]["motor"]["position"] = position self.dataReady.emit(self.device_object) @Slot(int, int) def update_motor_direction(self, motor_index, direction): self.device_object[f"scanner{motor_index}"]["motor"]["direction"] = direction self.dataReady.emit(self.device_object) @Slot(int,float) def update_motor_velocity(self, motor_index, velocity): self.device_object[f"scanner{motor_index}"]["motor"]["velocity"] = velocity self.dataReady.emit(self.device_object) @Slot(int, dict) def update_alu_info(self, alu_index, info): self.device_object["global_dev"]["device"]["light"] = info["light"] self.dataReady.emit(self.device_object) @Slot(int, dict) def update_wsu_info(self, wsu_index, info): self.device_object["global_dev"]["device"]["cw_flow_rate"] = info["flow_rate"] self.device_object["global_dev"]["device"]["water_temperature"] = info["water_temp"] self.dataReady.emit(self.device_object) @Slot(int, dict) def update_osu_info(self, osu_index, info): self.device_object[f"scanner{osu_index}"]["xray"]["oil_temperature"] = info["oil_temp"] self.device_object[f"scanner{osu_index}"]["xray"]["liquid_level"] = info["oil_level"] self.dataReady.emit(self.device_object) @Slot(int, dict) def update_hsv_info(self, hsv_index, info): self.device_object[f"scanner{hsv_index}"]["power"]["voltage_value"] = info["voltage"] self.device_object[f"scanner{hsv_index}"]["power"]["current_value"] = info["current"] self.device_object[f"scanner{hsv_index}"]["power"]["filament_current_value"] = info["current_filament"] self.device_object[f"scanner{hsv_index}"]["power"]["temperature"] = info["internal_temperature"] self.device_object[f"scanner{hsv_index}"]["power"]["enable_status"] = 1 if info["switch_status"] == True else 0 # self.device_object[f"scanner{hsv_index}"]["xray"]["enable_status"] = 1 if info["xray_status"] == True else 0 # self.device_object[f"scanner{hsv_index}"]["power"]["voltage_setting_value"] = info["param"]["kV"] # self.device_object[f"scanner{hsv_index}"]["power"]["current_setting_value"] = info["param"]["mA"] #TODO # self.device_object[f"scanner{hsv_index}"]["power"]["filament_current_setting_value"] = info["param"]["filament_limit"] # self.device_object[f"scanner{hsv_index}"]["power"]["filament_preheating_current_setting_value"] = info["param"]["filament_preheat"] self.dataReady.emit(self.device_object) @Slot(int,float) def update_motor_setting_velocity(self, motor_index, setting_velocity): self.device_object[f"scanner{motor_index}"]["motor"]["setting_velocity"] = setting_velocity self.dataReady.emit(self.device_object) @Slot(str, int) def write_data(self, dbname, num): self.settings.setValue(dbname, num) # 保存到设置中 return True def reapply_write_settings(self): """ 从 QSettings 加载之前保存的写入日志 """ dbnames = self.settings.allKeys() # 获取所有键 for dbname in dbnames: num = self.settings.value(dbname) # 获取对应的值 print(f"Reapplying write: {dbname} = {num}") self.write_data(dbname, num)