Files

480 lines
14 KiB
C

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "string.h"
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
CRC_HandleTypeDef hcrc;
UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_CRC_Init(void);
/* USER CODE BEGIN PFP */
/* 宏定义区(可快�?�修改参数) */
#define SLAVE_ADDR 0x30 // 从机地址
#define LED_COIL_ADDR 0x0000 // LED线圈地址
#define TEMP_REG_ADDR 0x1000 // 温度寄存器地�??
/* 全局变量 */
uint8_t modbusRxBuf[256]; // Modbus接收缓冲�??
uint8_t modbusTxBuf[256]; // Modbus发�?�缓冲区
volatile uint8_t rxFlag = 0; // 接收完成标志
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
if(huart->Instance == USART2){
HAL_UART_Receive_IT(huart, modbusRxBuf, 1); // 重置接收
}
}
// 中断回调函数
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) {
static uint8_t cnt = 0;
if(huart->Instance == USART2){
USART1->TDR = modbusRxBuf[cnt];
if(cnt == 0 && modbusRxBuf[0] != SLAVE_ADDR){
HAL_UART_Receive_IT(huart, modbusRxBuf, 1); // 重置接收
return;
}
if(++cnt >= 8){ // 严格8字节接收
cnt = 0;
rxFlag = 1;
}
HAL_UART_Receive_IT(huart, &modbusRxBuf[cnt], 1);
}
}
/* CRC计算函数 */
uint16_t CRC16(uint8_t *buf, int len)
{
uint16_t crc = 0xFFFF;
for(int pos=0; pos<len; pos++){
crc ^= (uint16_t)buf[pos];
for(int i=8; i!=0; i--){
if((crc & 0x0001) != 0){
crc >>= 1;
crc ^= 0xA001;
}else{
crc >>= 1;
}
}
}
return crc;
}
/* CRC计算函数 */
void AppendCRC(uint8_t* buf, uint8_t len)
{
uint16_t crc = CRC16(buf, len);
buf[len] = crc & 0xFF; // 低字节在前(网页3�?
buf[len+1] = crc >> 8; // 高字节在�?
}
/* 指令处理函数 */
void Process_Modbus(void)
{
/* 第一层地�?过滤 */
if(modbusRxBuf[0] != SLAVE_ADDR) return; // 非本机地�?直接忽略
/* 第二层CRC验证 */
uint16_t crc = CRC16(modbusRxBuf, 6);
if(*(uint16_t*)&modbusRxBuf[6] != crc) return;
switch(modbusRxBuf[1]){
case 0x01: // Read Coils
if(*(uint16_t*)&modbusRxBuf[2] == LED_COIL_ADDR)
{
modbusTxBuf[0] = SLAVE_ADDR;
modbusTxBuf[1] = 0x01;
modbusTxBuf[2] = 0x01; // Byte count
if(HAL_GPIO_ReadPin(GPIOA, LED1_Pin) == 1)
{modbusTxBuf[3] = 0x01;}
else
{modbusTxBuf[3] = 0x00;}
modbusTxBuf[3] = HAL_GPIO_ReadPin(GPIOA, LED1_Pin) ? 0x01 : 0x00;
AppendCRC(modbusTxBuf, 4);
HAL_UART_Transmit(&huart2, modbusTxBuf, 6, 100); // 精确发�??6字节
}
break;
case 0x05: // Write Coil
if(*(uint16_t*)&modbusRxBuf[2] == LED_COIL_ADDR)
{
// 控制LED
if(modbusRxBuf[4] == 0xFF) {
HAL_GPIO_WritePin(GPIOA, LED1_Pin|LED2_Pin, GPIO_PIN_SET);
} else {
HAL_GPIO_WritePin(GPIOA, LED1_Pin|LED2_Pin, GPIO_PIN_RESET);
}
memcpy(modbusTxBuf, modbusRxBuf, 6); // 回显�?6字节
AppendCRC(modbusTxBuf, 6);
HAL_UART_Transmit(&huart2, modbusTxBuf, 8, 100); // 写操�?8字节响应
}
break;
case 0x03: // Read Registers
if(*(uint16_t*)&modbusRxBuf[2] == TEMP_REG_ADDR)
{
modbusTxBuf[0] = SLAVE_ADDR;
modbusTxBuf[1] = 0x03;
modbusTxBuf[2] = 0x02; // 两个字节数据
uint16_t temp = 25; // 实际�?替换为传感器读取
modbusTxBuf[3] = temp >> 8;
modbusTxBuf[4] = temp & 0xFF;
AppendCRC(modbusTxBuf, 5);
HAL_UART_Transmit(&huart2, modbusTxBuf, 7, 100); // 7字节响应
}
break;
}
memset(modbusTxBuf, 0, sizeof(modbusTxBuf)); // 清空发�?�缓冲区
}
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART1_UART_Init();
MX_USART2_UART_Init();
MX_CRC_Init();
/* USER CODE BEGIN 2 */
// 发�?�测试Modbus指令
// uint8_t testCmd[] = {0x01, 0x03, 0x12, 0x34, 0x56, 0x01};
// AppendCRC(testCmd, 6); // 添加CRC校验
// HAL_UART_Transmit(&huart2, testCmd, sizeof(testCmd), 1000);
HAL_GPIO_WritePin(GPIOA, LED2_Pin|LED1_Pin, GPIO_PIN_SET);
HAL_UART_Transmit(&huart1, modbusTxBuf, 6, 100);
HAL_UART_Transmit(&huart2, modbusTxBuf, 6, 100);
HAL_Delay(1000);
HAL_GPIO_WritePin(GPIOA, LED2_Pin|LED1_Pin, GPIO_PIN_RESET);
HAL_Delay(100);
//HAL_UART_Receive_IT(&huart1, modbusRxBuf, 8); // 启动接收中断
HAL_UART_Receive_IT(&huart2, modbusRxBuf, 1); // 启动接收中断
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
if(rxFlag){
rxFlag = 0;
Process_Modbus();
HAL_GPIO_WritePin(GPIOA, LED2_Pin, GPIO_PIN_SET);
HAL_Delay(100);
HAL_GPIO_WritePin(GPIOA, LED2_Pin, GPIO_PIN_RESET);
HAL_Delay(100);
}
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Configure the main internal regulator output voltage
*/
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
RCC_OscInitStruct.PLL.PLLN = 8;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief CRC Initialization Function
* @param None
* @retval None
*/
static void MX_CRC_Init(void)
{
/* USER CODE BEGIN CRC_Init 0 */
/* USER CODE END CRC_Init 0 */
/* USER CODE BEGIN CRC_Init 1 */
/* USER CODE END CRC_Init 1 */
hcrc.Instance = CRC;
hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;
hcrc.Init.DefaultInitValueUse = DEFAULT_INIT_VALUE_ENABLE;
hcrc.Init.InputDataInversionMode = CRC_INPUTDATA_INVERSION_NONE;
hcrc.Init.OutputDataInversionMode = CRC_OUTPUTDATA_INVERSION_DISABLE;
hcrc.InputDataFormat = CRC_INPUTDATA_FORMAT_BYTES;
if (HAL_CRC_Init(&hcrc) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN CRC_Init 2 */
/* USER CODE END CRC_Init 2 */
}
/**
* @brief USART1 Initialization Function
* @param None
* @retval None
*/
static void MX_USART1_UART_Init(void)
{
/* USER CODE BEGIN USART1_Init 0 */
/* USER CODE END USART1_Init 0 */
/* USER CODE BEGIN USART1_Init 1 */
/* USER CODE END USART1_Init 1 */
huart1.Instance = USART1;
huart1.Init.BaudRate = 9600;
huart1.Init.WordLength = UART_WORDLENGTH_8B;
huart1.Init.StopBits = UART_STOPBITS_1;
huart1.Init.Parity = UART_PARITY_NONE;
huart1.Init.Mode = UART_MODE_TX_RX;
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
if (HAL_UART_Init(&huart1) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART1_Init 2 */
/* USER CODE END USART1_Init 2 */
}
/**
* @brief USART2 Initialization Function
* @param None
* @retval None
*/
static void MX_USART2_UART_Init(void)
{
/* USER CODE BEGIN USART2_Init 0 */
/* USER CODE END USART2_Init 0 */
/* USER CODE BEGIN USART2_Init 1 */
/* USER CODE END USART2_Init 1 */
huart2.Instance = USART2;
huart2.Init.BaudRate = 9600;
huart2.Init.WordLength = UART_WORDLENGTH_8B;
huart2.Init.StopBits = UART_STOPBITS_1;
huart2.Init.Parity = UART_PARITY_NONE;
huart2.Init.Mode = UART_MODE_TX_RX;
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
huart2.Init.ClockPrescaler = UART_PRESCALER_DIV1;
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
if (HAL_UART_Init(&huart2) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART2_Init 2 */
/* USER CODE END USART2_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* USER CODE BEGIN MX_GPIO_Init_1 */
/* USER CODE END MX_GPIO_Init_1 */
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, LED2_Pin|LED1_Pin, GPIO_PIN_RESET);
/*Configure GPIO pins : LED2_Pin LED1_Pin */
GPIO_InitStruct.Pin = LED2_Pin|LED1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN MX_GPIO_Init_2 */
/* USER CODE END MX_GPIO_Init_2 */
}
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */