#!/usr/bin/env python3 # -*- coding: utf-8 -*- """ SikoraDaqReader 上位机 ====================== 通过 USB 虚拟串口与 STM32 板卡通讯,解析双通道 uint16 数据并实时绘制曲线。 板卡通讯协议: 下发命令: 55 AA XX YY CC XX YY = 采集时间(ms, 小端); 时间>0 启动采集, 时间=0 强制停止 上传数据: AA BB d0 d1 d2 d3 d0d1 = 通道1 (小端 uint16), d2d3 = 通道2 (小端 uint16) 操作说明: - 选择串口 -> 连接 - 开始采集: 持续下发启动命令(保活), 板卡持续回传数据 - 停止采集: 下发停止命令(时间=0) - 曲线可拖动(左键)、可缩放(滚轮/右键框选)、可清空(按钮) - 勾选"自动跟随"则X轴滚动显示最新数据; 取消勾选后可自由拖动缩放查看历史 """ import sys import queue from collections import deque import serial import serial.tools.list_ports from PyQt5.QtCore import QThread, pyqtSignal, pyqtSlot, QTimer from PyQt5.QtWidgets import ( QApplication, QMainWindow, QWidget, QVBoxLayout, QHBoxLayout, QComboBox, QPushButton, QLabel, QCheckBox, QMessageBox, ) import pyqtgraph as pg # ---------------- 协议常量 ---------------- HEADER = b"\xAA\xBB" # 板卡上传数据帧头 CMD_START_TIME_MS = 10000 # 下发的采集时长(ms), 板卡据此持续采集 KEEPALIVE_INTERVAL_MS = 2000 # 定时重发启动命令, 防止板卡超时自动停止 MAX_POINTS = 100000 # 曲线最多保留的采样点数 FOLLOW_WINDOW = 2000 # "自动跟随"时显示的最新点数 def build_command(time_ms: int) -> bytes: """组装下发命令 55 AA XX YY CC, XX YY 为时长小端""" lo = time_ms & 0xFF hi = (time_ms >> 8) & 0xFF return bytes([0x55, 0xAA, lo, hi, 0xCC]) # ---------------- 串口接收线程 ---------------- class ReaderThread(QThread): """在独立线程中读写串口: 解析上传帧并通过信号投递双通道数据""" data_received = pyqtSignal(int, int) # (ch1, ch2) error_occurred = pyqtSignal(str) frame_raw = pyqtSignal(bytes) # 每收到一帧(不含帧头的4字节原始数据)就投递, 供UI侧决定是否作为温度帧 def __init__(self, port: str, baudrate: int = 115200): super().__init__() self.port = port self.baudrate = baudrate self.serial = None self._running = False self.cmd_queue: "queue.Queue[bytes]" = queue.Queue() def send_command(self, data: bytes) -> None: """主线程调用: 投递待发送命令(线程安全)""" self.cmd_queue.put(data) def stop(self) -> None: self._running = False def run(self) -> None: try: self.serial = serial.Serial(self.port, self.baudrate, timeout=0.05) except Exception as e: self.error_occurred.emit(f"打开串口失败: {e}") return self._running = True buf = bytearray() while True: # 先发送待发命令(含停止命令, 确保断开前能发出) self._drain_commands() if not self._running: break try: chunk = self.serial.read(256) except Exception as e: self.error_occurred.emit(f"读取串口失败: {e}") break if chunk: buf.extend(chunk) self._parse(buf) try: self.serial.close() except Exception: pass def _drain_commands(self) -> None: while True: try: cmd = self.cmd_queue.get_nowait() except queue.Empty: return try: self.serial.write(cmd) except Exception as e: self.error_occurred.emit(f"发送命令失败: {e}") def _parse(self, buf: bytearray) -> None: """从缓冲区提取完整帧 AA BB d0 d1 d2 d3, 解析为两通道 uint16""" while True: idx = buf.find(HEADER) if idx == -1: # 保留可能是帧头首字节的 0xAA, 避免跨包漏帧 if buf and buf[-1] == 0xAA: del buf[:-1] else: buf.clear() return if idx > 0: del buf[:idx] # 丢弃帧头前的杂散字节 if len(buf) < 6: return # 帧不完整, 等待更多数据 data = bytes(buf[2:6]) del buf[:6] ch1 = data[0] | (data[1] << 8) ch2 = data[2] | (data[3] << 8) self.frame_raw.emit(data) # 先投递原始4字节, UI侧判断是否为温度帧 self.data_received.emit(ch1, ch2) # ---------------- 主窗口 ---------------- class MainWindow(QMainWindow): def __init__(self): super().__init__() self.setWindowTitle("Sikora DAQ Reader 双通道采集") self.resize(1000, 640) self.thread: ReaderThread = None self.keepalive_timer = QTimer(self) self.keepalive_timer.timeout.connect(self._send_start_keepalive) # 显示刷新定时器(独立于数据到达, 固定刷新率以降低CPU占用) self.display_timer = QTimer(self) self.display_timer.timeout.connect(self._refresh_plot) self.display_timer.start(30) # 数据缓冲(滚动窗口) self.sample_index = 0 self.x = deque(maxlen=MAX_POINTS) self.y1 = deque(maxlen=MAX_POINTS) self.y2 = deque(maxlen=MAX_POINTS) # 采集状态: True 表示下一个到达的帧视为"采集后第一帧", 用于识别温度帧 self._first_frame = False self._build_ui() self._refresh_ports() # ---- 界面构建 ---- def _build_ui(self): central = QWidget() self.setCentralWidget(central) root = QVBoxLayout(central) bar = QHBoxLayout() bar.addWidget(QLabel("串口:")) self.port_combo = QComboBox() self.port_combo.setMinimumWidth(200) bar.addWidget(self.port_combo) self.refresh_btn = QPushButton("刷新串口") self.refresh_btn.clicked.connect(self._refresh_ports) bar.addWidget(self.refresh_btn) self.connect_btn = QPushButton("连接") self.connect_btn.setCheckable(True) self.connect_btn.clicked.connect(self._on_connect) bar.addWidget(self.connect_btn) self.start_btn = QPushButton("开始采集") self.start_btn.setEnabled(False) self.start_btn.clicked.connect(self._on_start) bar.addWidget(self.start_btn) self.stop_btn = QPushButton("停止采集") self.stop_btn.setEnabled(False) self.stop_btn.clicked.connect(self._on_stop) bar.addWidget(self.stop_btn) self.clear_btn = QPushButton("清空曲线") self.clear_btn.clicked.connect(self._on_clear) bar.addWidget(self.clear_btn) self.follow_chk = QCheckBox("自动跟随") self.follow_chk.setChecked(True) bar.addWidget(self.follow_chk) bar.addStretch() self.temp_lbl = QLabel("温度: -- ℃") self.temp_lbl.setMinimumWidth(110) bar.addWidget(self.temp_lbl) self.status_lbl = QLabel("未连接") self.status_lbl.setMinimumWidth(120) bar.addWidget(self.status_lbl) root.addLayout(bar) # 绘图区 pg.setConfigOptions(antialias=False) self.plot = pg.PlotWidget() self.plot.setLabel("bottom", "采样点") self.plot.setLabel("left", "数值") self.plot.showGrid(x=True, y=True, alpha=0.3) self.plot.addLegend(offset=(10, 10)) self.curve1 = self.plot.plot(pen=pg.mkPen("c", width=1), name="CH1") self.curve2 = self.plot.plot(pen=pg.mkPen("y", width=1), name="CH2") # 性能优化: 自动降采样 self.curve1.setDownsampling(method="peak", auto=True) self.curve2.setDownsampling(method="peak", auto=True) root.addWidget(self.plot) # ---- 串口列表 ---- def _refresh_ports(self): self.port_combo.clear() for info in serial.tools.list_ports.comports(): self.port_combo.addItem(f"{info.device} - {info.description}", info.device) # ---- 连接 / 断开 ---- def _on_connect(self, checked: bool): if checked: port = self.port_combo.currentData() if not port: QMessageBox.warning(self, "提示", "请先选择串口") self.connect_btn.setChecked(False) return self._connect(port) else: self._disconnect() def _connect(self, port: str): self.thread = ReaderThread(port) self.thread.data_received.connect(self._on_data) self.thread.frame_raw.connect(self._on_frame_raw) self.thread.error_occurred.connect(self._on_reader_error) self.thread.start() self.connect_btn.setText("断开") self.start_btn.setEnabled(True) self.stop_btn.setEnabled(False) self.port_combo.setEnabled(False) self.refresh_btn.setEnabled(False) self.status_lbl.setText(f"已连接 {port}") self.temp_lbl.setText("温度: -- ℃") def _disconnect(self): self._stop_keepalive() if self.thread is not None: self.thread.stop() self.thread.wait(2000) self.thread = None self.connect_btn.setText("连接") self.connect_btn.setChecked(False) self.start_btn.setEnabled(False) self.stop_btn.setEnabled(False) self.port_combo.setEnabled(True) self.refresh_btn.setEnabled(True) self.status_lbl.setText("未连接") def _on_reader_error(self, msg: str): self.status_lbl.setText(f"错误: {msg}") # ---- 采集控制 ---- def _on_start(self): if self.thread is None: return self._first_frame = True # 标记下一帧为"采集后第一帧", 用于识别温度帧 self._send_start_keepalive() # 立即发送一次启动命令 self.keepalive_timer.start(KEEPALIVE_INTERVAL_MS) # 周期保活 self.start_btn.setEnabled(False) self.stop_btn.setEnabled(True) self.status_lbl.setText("采集中...") self.temp_lbl.setText("温度: -- ℃") def _on_stop(self): self._stop_keepalive() if self.thread is not None: self.thread.send_command(build_command(0)) # 时间=0 强制停止 self.start_btn.setEnabled(True) self.stop_btn.setEnabled(False) self.status_lbl.setText("已停止") def _send_start_keepalive(self): if self.thread is not None: self.thread.send_command(build_command(CMD_START_TIME_MS)) def _stop_keepalive(self): if self.keepalive_timer.isActive(): self.keepalive_timer.stop() # ---- 数据 / 绘图 ---- @pyqtSlot(bytes) def _on_frame_raw(self, raw: bytes): """原始4字节(不含帧头)回调。 采集后第一帧如满足 data[0]+data[2]==0xFF 则视作温度帧,不绘制。 """ if not self._first_frame: return self._first_frame = False if len(raw) == 4 and (raw[0] + raw[2]) & 0xFF == 0xFF: # 满足温度帧校验, 记录温度并抑制后续绘制 t_raw = raw[0] self.temp_lbl.setText(f"温度: {t_raw} ℃") setattr(self, "_skip_next_data", True) # 跳过紧随其后的 data_received @pyqtSlot(int, int) def _on_data(self, ch1: int, ch2: int): # frame_raw 先于 data_received 发出; 若被标记为温度帧则跳过绘制 if getattr(self, "_skip_next_data", False): self._skip_next_data = False return self.x.append(self.sample_index) self.y1.append(ch1) self.y2.append(ch2) self.sample_index += 1 def _refresh_plot(self): if not self.x: return self.curve1.setData(self.x, self.y1) self.curve2.setData(self.x, self.y2) if self.follow_chk.isChecked() and self.sample_index > 0: last = self.sample_index - 1 lo = last - FOLLOW_WINDOW if lo < 0: lo = 0 self.plot.setXRange(lo, last, padding=0.0) def _on_clear(self): self.x.clear() self.y1.clear() self.y2.clear() self.sample_index = 0 self.curve1.setData([], []) self.curve2.setData([], []) self.plot.autoRange() # 重置视图 # ---- 关闭清理 ---- def closeEvent(self, event): self._disconnect() super().closeEvent(event) def main(): app = QApplication(sys.argv) win = MainWindow() win.show() sys.exit(app.exec_()) if __name__ == "__main__": main()