/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file : main.c * @brief : Main program body ****************************************************************************** * @attention * * Copyright (c) 2026 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "dma.h" #include "tim.h" #include "usart.h" #include "usb_device.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #include "usbd_cdc_if.h" /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN PTD */ /* USER CODE END PTD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ /* 采集标志:1=正在采集,0=停止采集 */ volatile uint8_t g_acqFlag = 0; /* USB虚拟串口发送忙标志 */ volatile uint8_t g_usbTxBusy = 0; /* USART2 发送给DAQ的触发字节 */ static uint8_t g_uartTxByte = 0x00; /* USART2 DMA 接收缓冲区(每次接收4字节) */ static uint8_t g_uartRxBuf[4]; /* 环形队列:以4字节为一个槽位存储DAQ返回数据 */ #define RING_SLOTS 64U static volatile uint8_t g_ringBuf[RING_SLOTS][4]; static volatile uint16_t g_ringHead; /* 写索引(中断中更新) */ static volatile uint16_t g_ringTail; /* 读索引(主循环中更新) */ /* USB发送缓冲区:AA BB + 4字节数据 */ static uint8_t g_usbPacket[6]; /* 向环形队列压入4字节数据(在USART2 RxCplt中断中调用) */ static void RingBuf_Push(const uint8_t *data) { uint16_t next = (uint16_t)((g_ringHead + 1U) % RING_SLOTS); if (next != g_ringTail) /* 队列未满 */ { g_ringBuf[g_ringHead][0] = data[0]; g_ringBuf[g_ringHead][1] = data[1]; g_ringBuf[g_ringHead][2] = data[2]; g_ringBuf[g_ringHead][3] = data[3]; g_ringHead = next; } /* 队列满则丢弃本帧 */ } /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); static void MPU_Config(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ /** * @brief The application entry point. * @retval int */ int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MPU Configuration--------------------------------------------------------*/ MPU_Config(); /* MCU Configuration--------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); MX_USART2_UART_Init(); MX_USB_DEVICE_Init(); MX_TIM3_Init(); /* USER CODE BEGIN 2 */ /* 启动TIM3 1ms周期性中断 */ HAL_TIM_Base_Start_IT(&htim3); /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* 从环形队列取出一帧(4字节),加包头AA BB后通过USB虚拟串口发给上位机 */ if (g_ringHead != g_ringTail) { if (g_usbTxBusy == 0U) /* USB发送空闲才可发送 */ { uint16_t slot = g_ringTail; g_usbPacket[0] = 0xAA; g_usbPacket[1] = 0xBB; g_usbPacket[2] = g_ringBuf[slot][0]; g_usbPacket[3] = g_ringBuf[slot][1]; g_usbPacket[4] = g_ringBuf[slot][2]; g_usbPacket[5] = g_ringBuf[slot][3]; g_ringTail = (uint16_t)((g_ringTail + 1U) % RING_SLOTS); /* 消费一帧 */ CDC_Transmit_FS(g_usbPacket, 6); /* 发送成功后 g_usbTxBusy 被置1 */ } } /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ } /* USER CODE END 3 */ } /** * @brief System Clock Configuration * @retval None */ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; /** Supply configuration update enable */ HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); /** Configure the main internal regulator output voltage */ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 5; RCC_OscInitStruct.PLL.PLLN = 192; RCC_OscInitStruct.PLL.PLLP = 2; RCC_OscInitStruct.PLL.PLLQ = 8; RCC_OscInitStruct.PLL.PLLR = 2; RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; RCC_OscInitStruct.PLL.PLLFRACN = 0; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); } /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) { Error_Handler(); } } /* USER CODE BEGIN 4 */ /** * @brief TIM3 周期中断回调(1ms)。 * 采集时:先装填USART2 DMA接收4字节,再发送0x00触发DAQ返回数据。 * TX与RX使用各自独立的状态机(gState/RxState),可并发不冲突。 */ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) { if (htim->Instance != TIM3) { return; } if (g_acqFlag) { /* 清理上一周期未完成的接收(DAQ未应答等),避免帧错位 */ if (huart2.RxState != HAL_UART_STATE_READY) { HAL_UART_DMAStop(&huart2); } /* 先装填4字节DMA接收,再触发DAQ,确保不丢失应答首字节 */ HAL_UART_Receive_DMA(&huart2, g_uartRxBuf, 4); HAL_UART_Transmit_IT(&huart2, &g_uartTxByte, 1); /* RS485 DE由硬件自动控制 */ } } /** * @brief USART2 DMA接收完成回调(收到4字节)。 * 将数据压入环形队列。 */ void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) { if (huart->Instance == USART2) { RingBuf_Push((const uint8_t *)g_uartRxBuf); } } /* USER CODE END 4 */ /* MPU Configuration */ void MPU_Config(void) { MPU_Region_InitTypeDef MPU_InitStruct = {0}; /* Disables the MPU */ HAL_MPU_Disable(); /** Initializes and configures the Region and the memory to be protected */ MPU_InitStruct.Enable = MPU_REGION_ENABLE; MPU_InitStruct.Number = MPU_REGION_NUMBER0; MPU_InitStruct.BaseAddress = 0x0; MPU_InitStruct.Size = MPU_REGION_SIZE_4GB; MPU_InitStruct.SubRegionDisable = 0x87; MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0; MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS; MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE; MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE; MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE; MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE; HAL_MPU_ConfigRegion(&MPU_InitStruct); /* Enables the MPU */ HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT); } /** * @brief This function is executed in case of error occurrence. * @retval None */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ /* User can add his own implementation to report the HAL error return state */ __disable_irq(); while (1) { } /* USER CODE END Error_Handler_Debug */ } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */