增加python上位机代码
This commit is contained in:
+3
-1
@@ -1,4 +1,6 @@
|
||||
**/MDK-ARM/cpy_scanner
|
||||
**/MDK-ARM/DebugConfig
|
||||
*.uvguix.*
|
||||
.vscode
|
||||
.vscode
|
||||
PyApp/venv
|
||||
PyApp/__pycache__
|
||||
+339
@@ -0,0 +1,339 @@
|
||||
#!/usr/bin/env python3
|
||||
# -*- coding: utf-8 -*-
|
||||
"""
|
||||
SikoraDaqReader 上位机
|
||||
======================
|
||||
通过 USB 虚拟串口与 STM32 板卡通讯,解析双通道 uint16 数据并实时绘制曲线。
|
||||
|
||||
板卡通讯协议:
|
||||
下发命令: 55 AA XX YY CC
|
||||
XX YY = 采集时间(ms, 小端); 时间>0 启动采集, 时间=0 强制停止
|
||||
上传数据: AA BB d0 d1 d2 d3
|
||||
d0d1 = 通道1 (小端 uint16), d2d3 = 通道2 (小端 uint16)
|
||||
|
||||
操作说明:
|
||||
- 选择串口 -> 连接
|
||||
- 开始采集: 持续下发启动命令(保活), 板卡持续回传数据
|
||||
- 停止采集: 下发停止命令(时间=0)
|
||||
- 曲线可拖动(左键)、可缩放(滚轮/右键框选)、可清空(按钮)
|
||||
- 勾选"自动跟随"则X轴滚动显示最新数据; 取消勾选后可自由拖动缩放查看历史
|
||||
"""
|
||||
|
||||
import sys
|
||||
import queue
|
||||
from collections import deque
|
||||
|
||||
import serial
|
||||
import serial.tools.list_ports
|
||||
|
||||
from PyQt5.QtCore import QThread, pyqtSignal, pyqtSlot, QTimer
|
||||
from PyQt5.QtWidgets import (
|
||||
QApplication, QMainWindow, QWidget, QVBoxLayout, QHBoxLayout,
|
||||
QComboBox, QPushButton, QLabel, QCheckBox, QMessageBox,
|
||||
)
|
||||
|
||||
import pyqtgraph as pg
|
||||
|
||||
|
||||
# ---------------- 协议常量 ----------------
|
||||
HEADER = b"\xAA\xBB" # 板卡上传数据帧头
|
||||
CMD_START_TIME_MS = 10000 # 下发的采集时长(ms), 板卡据此持续采集
|
||||
KEEPALIVE_INTERVAL_MS = 2000 # 定时重发启动命令, 防止板卡超时自动停止
|
||||
MAX_POINTS = 100000 # 曲线最多保留的采样点数
|
||||
FOLLOW_WINDOW = 2000 # "自动跟随"时显示的最新点数
|
||||
|
||||
|
||||
def build_command(time_ms: int) -> bytes:
|
||||
"""组装下发命令 55 AA XX YY CC, XX YY 为时长小端"""
|
||||
lo = time_ms & 0xFF
|
||||
hi = (time_ms >> 8) & 0xFF
|
||||
return bytes([0x55, 0xAA, lo, hi, 0xCC])
|
||||
|
||||
|
||||
# ---------------- 串口接收线程 ----------------
|
||||
class ReaderThread(QThread):
|
||||
"""在独立线程中读写串口: 解析上传帧并通过信号投递双通道数据"""
|
||||
|
||||
data_received = pyqtSignal(int, int) # (ch1, ch2)
|
||||
error_occurred = pyqtSignal(str)
|
||||
|
||||
def __init__(self, port: str, baudrate: int = 115200):
|
||||
super().__init__()
|
||||
self.port = port
|
||||
self.baudrate = baudrate
|
||||
self.serial = None
|
||||
self._running = False
|
||||
self.cmd_queue: "queue.Queue[bytes]" = queue.Queue()
|
||||
|
||||
def send_command(self, data: bytes) -> None:
|
||||
"""主线程调用: 投递待发送命令(线程安全)"""
|
||||
self.cmd_queue.put(data)
|
||||
|
||||
def stop(self) -> None:
|
||||
self._running = False
|
||||
|
||||
def run(self) -> None:
|
||||
try:
|
||||
self.serial = serial.Serial(self.port, self.baudrate, timeout=0.05)
|
||||
except Exception as e:
|
||||
self.error_occurred.emit(f"打开串口失败: {e}")
|
||||
return
|
||||
|
||||
self._running = True
|
||||
buf = bytearray()
|
||||
|
||||
while True:
|
||||
# 先发送待发命令(含停止命令, 确保断开前能发出)
|
||||
self._drain_commands()
|
||||
if not self._running:
|
||||
break
|
||||
|
||||
try:
|
||||
chunk = self.serial.read(256)
|
||||
except Exception as e:
|
||||
self.error_occurred.emit(f"读取串口失败: {e}")
|
||||
break
|
||||
|
||||
if chunk:
|
||||
buf.extend(chunk)
|
||||
self._parse(buf)
|
||||
|
||||
try:
|
||||
self.serial.close()
|
||||
except Exception:
|
||||
pass
|
||||
|
||||
def _drain_commands(self) -> None:
|
||||
while True:
|
||||
try:
|
||||
cmd = self.cmd_queue.get_nowait()
|
||||
except queue.Empty:
|
||||
return
|
||||
try:
|
||||
self.serial.write(cmd)
|
||||
except Exception as e:
|
||||
self.error_occurred.emit(f"发送命令失败: {e}")
|
||||
|
||||
def _parse(self, buf: bytearray) -> None:
|
||||
"""从缓冲区提取完整帧 AA BB d0 d1 d2 d3, 解析为两通道 uint16"""
|
||||
while True:
|
||||
idx = buf.find(HEADER)
|
||||
if idx == -1:
|
||||
# 保留可能是帧头首字节的 0xAA, 避免跨包漏帧
|
||||
if buf and buf[-1] == 0xAA:
|
||||
del buf[:-1]
|
||||
else:
|
||||
buf.clear()
|
||||
return
|
||||
if idx > 0:
|
||||
del buf[:idx] # 丢弃帧头前的杂散字节
|
||||
if len(buf) < 6:
|
||||
return # 帧不完整, 等待更多数据
|
||||
data = bytes(buf[2:6])
|
||||
del buf[:6]
|
||||
ch1 = data[0] | (data[1] << 8)
|
||||
ch2 = data[2] | (data[3] << 8)
|
||||
self.data_received.emit(ch1, ch2)
|
||||
|
||||
|
||||
# ---------------- 主窗口 ----------------
|
||||
class MainWindow(QMainWindow):
|
||||
def __init__(self):
|
||||
super().__init__()
|
||||
self.setWindowTitle("Sikora DAQ Reader 双通道采集")
|
||||
self.resize(1000, 640)
|
||||
|
||||
self.thread: ReaderThread = None
|
||||
self.keepalive_timer = QTimer(self)
|
||||
self.keepalive_timer.timeout.connect(self._send_start_keepalive)
|
||||
|
||||
# 显示刷新定时器(独立于数据到达, 固定刷新率以降低CPU占用)
|
||||
self.display_timer = QTimer(self)
|
||||
self.display_timer.timeout.connect(self._refresh_plot)
|
||||
self.display_timer.start(30)
|
||||
|
||||
# 数据缓冲(滚动窗口)
|
||||
self.sample_index = 0
|
||||
self.x = deque(maxlen=MAX_POINTS)
|
||||
self.y1 = deque(maxlen=MAX_POINTS)
|
||||
self.y2 = deque(maxlen=MAX_POINTS)
|
||||
|
||||
self._build_ui()
|
||||
self._refresh_ports()
|
||||
|
||||
# ---- 界面构建 ----
|
||||
def _build_ui(self):
|
||||
central = QWidget()
|
||||
self.setCentralWidget(central)
|
||||
root = QVBoxLayout(central)
|
||||
|
||||
bar = QHBoxLayout()
|
||||
bar.addWidget(QLabel("串口:"))
|
||||
self.port_combo = QComboBox()
|
||||
self.port_combo.setMinimumWidth(200)
|
||||
bar.addWidget(self.port_combo)
|
||||
|
||||
self.refresh_btn = QPushButton("刷新串口")
|
||||
self.refresh_btn.clicked.connect(self._refresh_ports)
|
||||
bar.addWidget(self.refresh_btn)
|
||||
|
||||
self.connect_btn = QPushButton("连接")
|
||||
self.connect_btn.setCheckable(True)
|
||||
self.connect_btn.clicked.connect(self._on_connect)
|
||||
bar.addWidget(self.connect_btn)
|
||||
|
||||
self.start_btn = QPushButton("开始采集")
|
||||
self.start_btn.setEnabled(False)
|
||||
self.start_btn.clicked.connect(self._on_start)
|
||||
bar.addWidget(self.start_btn)
|
||||
|
||||
self.stop_btn = QPushButton("停止采集")
|
||||
self.stop_btn.setEnabled(False)
|
||||
self.stop_btn.clicked.connect(self._on_stop)
|
||||
bar.addWidget(self.stop_btn)
|
||||
|
||||
self.clear_btn = QPushButton("清空曲线")
|
||||
self.clear_btn.clicked.connect(self._on_clear)
|
||||
bar.addWidget(self.clear_btn)
|
||||
|
||||
self.follow_chk = QCheckBox("自动跟随")
|
||||
self.follow_chk.setChecked(True)
|
||||
bar.addWidget(self.follow_chk)
|
||||
|
||||
bar.addStretch()
|
||||
self.status_lbl = QLabel("未连接")
|
||||
self.status_lbl.setMinimumWidth(120)
|
||||
bar.addWidget(self.status_lbl)
|
||||
root.addLayout(bar)
|
||||
|
||||
# 绘图区
|
||||
pg.setConfigOptions(antialias=False)
|
||||
self.plot = pg.PlotWidget()
|
||||
self.plot.setLabel("bottom", "采样点")
|
||||
self.plot.setLabel("left", "数值")
|
||||
self.plot.showGrid(x=True, y=True, alpha=0.3)
|
||||
self.plot.addLegend(offset=(10, 10))
|
||||
self.curve1 = self.plot.plot(pen=pg.mkPen("c", width=1), name="CH1")
|
||||
self.curve2 = self.plot.plot(pen=pg.mkPen("y", width=1), name="CH2")
|
||||
# 性能优化: 自动降采样
|
||||
self.curve1.setDownsampling(method="peak", auto=True)
|
||||
self.curve2.setDownsampling(method="peak", auto=True)
|
||||
root.addWidget(self.plot)
|
||||
|
||||
# ---- 串口列表 ----
|
||||
def _refresh_ports(self):
|
||||
self.port_combo.clear()
|
||||
for info in serial.tools.list_ports.comports():
|
||||
self.port_combo.addItem(f"{info.device} - {info.description}", info.device)
|
||||
|
||||
# ---- 连接 / 断开 ----
|
||||
def _on_connect(self, checked: bool):
|
||||
if checked:
|
||||
port = self.port_combo.currentData()
|
||||
if not port:
|
||||
QMessageBox.warning(self, "提示", "请先选择串口")
|
||||
self.connect_btn.setChecked(False)
|
||||
return
|
||||
self._connect(port)
|
||||
else:
|
||||
self._disconnect()
|
||||
|
||||
def _connect(self, port: str):
|
||||
self.thread = ReaderThread(port)
|
||||
self.thread.data_received.connect(self._on_data)
|
||||
self.thread.error_occurred.connect(self._on_reader_error)
|
||||
self.thread.start()
|
||||
self.connect_btn.setText("断开")
|
||||
self.start_btn.setEnabled(True)
|
||||
self.stop_btn.setEnabled(False)
|
||||
self.port_combo.setEnabled(False)
|
||||
self.refresh_btn.setEnabled(False)
|
||||
self.status_lbl.setText(f"已连接 {port}")
|
||||
|
||||
def _disconnect(self):
|
||||
self._stop_keepalive()
|
||||
if self.thread is not None:
|
||||
self.thread.stop()
|
||||
self.thread.wait(2000)
|
||||
self.thread = None
|
||||
self.connect_btn.setText("连接")
|
||||
self.connect_btn.setChecked(False)
|
||||
self.start_btn.setEnabled(False)
|
||||
self.stop_btn.setEnabled(False)
|
||||
self.port_combo.setEnabled(True)
|
||||
self.refresh_btn.setEnabled(True)
|
||||
self.status_lbl.setText("未连接")
|
||||
|
||||
def _on_reader_error(self, msg: str):
|
||||
self.status_lbl.setText(f"错误: {msg}")
|
||||
|
||||
# ---- 采集控制 ----
|
||||
def _on_start(self):
|
||||
if self.thread is None:
|
||||
return
|
||||
self._send_start_keepalive() # 立即发送一次启动命令
|
||||
self.keepalive_timer.start(KEEPALIVE_INTERVAL_MS) # 周期保活
|
||||
self.start_btn.setEnabled(False)
|
||||
self.stop_btn.setEnabled(True)
|
||||
self.status_lbl.setText("采集中...")
|
||||
|
||||
def _on_stop(self):
|
||||
self._stop_keepalive()
|
||||
if self.thread is not None:
|
||||
self.thread.send_command(build_command(0)) # 时间=0 强制停止
|
||||
self.start_btn.setEnabled(True)
|
||||
self.stop_btn.setEnabled(False)
|
||||
self.status_lbl.setText("已停止")
|
||||
|
||||
def _send_start_keepalive(self):
|
||||
if self.thread is not None:
|
||||
self.thread.send_command(build_command(CMD_START_TIME_MS))
|
||||
|
||||
def _stop_keepalive(self):
|
||||
if self.keepalive_timer.isActive():
|
||||
self.keepalive_timer.stop()
|
||||
|
||||
# ---- 数据 / 绘图 ----
|
||||
@pyqtSlot(int, int)
|
||||
def _on_data(self, ch1: int, ch2: int):
|
||||
self.x.append(self.sample_index)
|
||||
self.y1.append(ch1)
|
||||
self.y2.append(ch2)
|
||||
self.sample_index += 1
|
||||
|
||||
def _refresh_plot(self):
|
||||
if not self.x:
|
||||
return
|
||||
self.curve1.setData(self.x, self.y1)
|
||||
self.curve2.setData(self.x, self.y2)
|
||||
if self.follow_chk.isChecked() and self.sample_index > 0:
|
||||
last = self.sample_index - 1
|
||||
lo = last - FOLLOW_WINDOW
|
||||
if lo < 0:
|
||||
lo = 0
|
||||
self.plot.setXRange(lo, last, padding=0.0)
|
||||
|
||||
def _on_clear(self):
|
||||
self.x.clear()
|
||||
self.y1.clear()
|
||||
self.y2.clear()
|
||||
self.sample_index = 0
|
||||
self.curve1.setData([], [])
|
||||
self.curve2.setData([], [])
|
||||
self.plot.autoRange() # 重置视图
|
||||
|
||||
# ---- 关闭清理 ----
|
||||
def closeEvent(self, event):
|
||||
self._disconnect()
|
||||
super().closeEvent(event)
|
||||
|
||||
|
||||
def main():
|
||||
app = QApplication(sys.argv)
|
||||
win = MainWindow()
|
||||
win.show()
|
||||
sys.exit(app.exec_())
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -0,0 +1,3 @@
|
||||
PyQt5>=5.15
|
||||
pyqtgraph>=0.12
|
||||
pyserial>=3.5
|
||||
Reference in New Issue
Block a user