Files
SikoraDaqReader/Core/Src/main.c
T
2026-08-16 11:27:59 +08:00

349 lines
10 KiB
C

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2026 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "dma.h"
#include "tim.h"
#include "usart.h"
#include "usb_device.h"
#include "gpio.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "usbd_cdc_if.h"
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* 采集标志:1=正在采集,0=停止采集 */
volatile uint8_t g_acqFlag = 0;
/* 采集剩余时间(ms),减到0自动停止采集 */
volatile uint16_t g_acqRemainMs = 0;
/* USB虚拟串口发送忙标志 */
volatile uint8_t g_usbTxBusy = 0;
/* USART2 发送给DAQ的触发字节 */
static uint8_t g_uartTxByte = 0x00;
/* USART2 DMA 接收缓冲区(每次接收4字节) */
static uint8_t g_uartRxBuf[4];
/* 环形队列:以4字节为一个槽位存储DAQ返回数据 */
#define RING_SLOTS 64U
static volatile uint8_t g_ringBuf[RING_SLOTS][4];
static volatile uint16_t g_ringHead; /* 写索引(中断中更新) */
static volatile uint16_t g_ringTail; /* 读索引(主循环中更新) */
/* USB发送缓冲区:AA BB + 4字节数据 */
static uint8_t g_usbPacket[6];
/* 向环形队列压入4字节数据(在USART2 RxCplt中断中调用) */
static void RingBuf_Push(const uint8_t *data)
{
uint16_t next = (uint16_t)((g_ringHead + 1U) % RING_SLOTS);
if (next != g_ringTail) /* 队列未满 */
{
g_ringBuf[g_ringHead][0] = data[0];
g_ringBuf[g_ringHead][1] = data[1];
g_ringBuf[g_ringHead][2] = data[2];
g_ringBuf[g_ringHead][3] = data[3];
g_ringHead = next;
}
/* 队列满则丢弃本帧 */
}
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MPU_Config(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MPU Configuration--------------------------------------------------------*/
MPU_Config();
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_USART2_UART_Init();
MX_USB_DEVICE_Init();
MX_TIM3_Init();
/* USER CODE BEGIN 2 */
/* 启动TIM3 1ms周期性中断 */
HAL_TIM_Base_Start_IT(&htim3);
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* 从环形队列取出一帧(4字节),加包头AA BB后通过USB虚拟串口发给上位机 */
if (g_ringHead != g_ringTail)
{
if (g_usbTxBusy == 0U) /* USB发送空闲才可发送 */
{
uint16_t slot = g_ringTail;
g_usbPacket[0] = 0xAA;
g_usbPacket[1] = 0xBB;
g_usbPacket[2] = g_ringBuf[slot][0];
g_usbPacket[3] = g_ringBuf[slot][1];
g_usbPacket[4] = g_ringBuf[slot][2];
g_usbPacket[5] = g_ringBuf[slot][3];
g_ringTail = (uint16_t)((g_ringTail + 1U) % RING_SLOTS); /* 消费一帧 */
CDC_Transmit_FS(g_usbPacket, 6); /* 发送成功后 g_usbTxBusy 被置1 */
}
}
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Supply configuration update enable
*/
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
/** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 5;
RCC_OscInitStruct.PLL.PLLN = 192;
RCC_OscInitStruct.PLL.PLLP = 2;
RCC_OscInitStruct.PLL.PLLQ = 8;
RCC_OscInitStruct.PLL.PLLR = 2;
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
RCC_OscInitStruct.PLL.PLLFRACN = 0;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE BEGIN 4 */
/**
* @brief TIM3 周期中断回调(1ms)。
* 采集时:先装填USART2 DMA接收4字节,再发送0x00触发DAQ返回数据。
* 每次中断递减采集剩余时间,减到0自动停止。
* TX与RX使用各自独立的状态机(gState/RxState),可并发不冲突。
*/
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
if (htim->Instance != TIM3)
{
return;
}
if (g_acqFlag)
{
if (g_acqRemainMs == 0U)
{
/* 无剩余时间,确保停止 */
g_acqFlag = 0;
}
else
{
/* 清理上一周期未完成的接收(DAQ未应答等),避免帧错位 */
if (huart2.RxState != HAL_UART_STATE_READY)
{
HAL_UART_DMAStop(&huart2);
}
/* 先装填4字节DMA接收,再触发DAQ,确保不丢失应答首字节 */
HAL_UART_Receive_DMA(&huart2, g_uartRxBuf, 4);
HAL_UART_Transmit_IT(&huart2, &g_uartTxByte, 1); /* RS485 DE由硬件自动控制 */
/* 递减剩余时间,减到0则本次为最后一帧并自动停止 */
g_acqRemainMs--;
if (g_acqRemainMs == 0U)
{
g_acqFlag = 0;
}
}
}
}
/**
* @brief USART2 DMA接收完成回调(收到4字节)。
* 将数据压入环形队列。
*/
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
if (huart->Instance == USART2)
{
RingBuf_Push((const uint8_t *)g_uartRxBuf);
}
}
/* USER CODE END 4 */
/* MPU Configuration */
void MPU_Config(void)
{
MPU_Region_InitTypeDef MPU_InitStruct = {0};
/* Disables the MPU */
HAL_MPU_Disable();
/** Initializes and configures the Region and the memory to be protected
*/
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
MPU_InitStruct.BaseAddress = 0x0;
MPU_InitStruct.Size = MPU_REGION_SIZE_4GB;
MPU_InitStruct.SubRegionDisable = 0x87;
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS;
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
HAL_MPU_ConfigRegion(&MPU_InitStruct);
/* Enables the MPU */
HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
}
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */