349 lines
10 KiB
C
349 lines
10 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file : main.c
|
|
* @brief : Main program body
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2026 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
#include "dma.h"
|
|
#include "tim.h"
|
|
#include "usart.h"
|
|
#include "usb_device.h"
|
|
#include "gpio.h"
|
|
|
|
/* Private includes ----------------------------------------------------------*/
|
|
/* USER CODE BEGIN Includes */
|
|
#include "usbd_cdc_if.h"
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN PTD */
|
|
|
|
/* USER CODE END PTD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PD */
|
|
|
|
/* USER CODE END PD */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PM */
|
|
|
|
/* USER CODE END PM */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
/* USER CODE BEGIN PV */
|
|
|
|
/* 采集标志:1=正在采集,0=停止采集 */
|
|
volatile uint8_t g_acqFlag = 0;
|
|
|
|
/* 采集剩余时间(ms),减到0自动停止采集 */
|
|
volatile uint16_t g_acqRemainMs = 0;
|
|
|
|
/* USB虚拟串口发送忙标志 */
|
|
volatile uint8_t g_usbTxBusy = 0;
|
|
|
|
/* USART2 发送给DAQ的触发字节 */
|
|
static uint8_t g_uartTxByte = 0x00;
|
|
|
|
/* USART2 DMA 接收缓冲区(每次接收4字节) */
|
|
static uint8_t g_uartRxBuf[4];
|
|
|
|
/* 环形队列:以4字节为一个槽位存储DAQ返回数据 */
|
|
#define RING_SLOTS 64U
|
|
static volatile uint8_t g_ringBuf[RING_SLOTS][4];
|
|
static volatile uint16_t g_ringHead; /* 写索引(中断中更新) */
|
|
static volatile uint16_t g_ringTail; /* 读索引(主循环中更新) */
|
|
|
|
/* USB发送缓冲区:AA BB + 4字节数据 */
|
|
static uint8_t g_usbPacket[6];
|
|
|
|
/* 向环形队列压入4字节数据(在USART2 RxCplt中断中调用) */
|
|
static void RingBuf_Push(const uint8_t *data)
|
|
{
|
|
uint16_t next = (uint16_t)((g_ringHead + 1U) % RING_SLOTS);
|
|
if (next != g_ringTail) /* 队列未满 */
|
|
{
|
|
g_ringBuf[g_ringHead][0] = data[0];
|
|
g_ringBuf[g_ringHead][1] = data[1];
|
|
g_ringBuf[g_ringHead][2] = data[2];
|
|
g_ringBuf[g_ringHead][3] = data[3];
|
|
g_ringHead = next;
|
|
}
|
|
/* 队列满则丢弃本帧 */
|
|
}
|
|
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
static void MPU_Config(void);
|
|
/* USER CODE BEGIN PFP */
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* Private user code ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/**
|
|
* @brief The application entry point.
|
|
* @retval int
|
|
*/
|
|
int main(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/* MPU Configuration--------------------------------------------------------*/
|
|
MPU_Config();
|
|
|
|
/* MCU Configuration--------------------------------------------------------*/
|
|
|
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
|
HAL_Init();
|
|
|
|
/* USER CODE BEGIN Init */
|
|
|
|
/* USER CODE END Init */
|
|
|
|
/* Configure the system clock */
|
|
SystemClock_Config();
|
|
|
|
/* USER CODE BEGIN SysInit */
|
|
|
|
/* USER CODE END SysInit */
|
|
|
|
/* Initialize all configured peripherals */
|
|
MX_GPIO_Init();
|
|
MX_DMA_Init();
|
|
MX_USART2_UART_Init();
|
|
MX_USB_DEVICE_Init();
|
|
MX_TIM3_Init();
|
|
/* USER CODE BEGIN 2 */
|
|
|
|
/* 启动TIM3 1ms周期性中断 */
|
|
HAL_TIM_Base_Start_IT(&htim3);
|
|
|
|
/* USER CODE END 2 */
|
|
|
|
/* Infinite loop */
|
|
/* USER CODE BEGIN WHILE */
|
|
while (1)
|
|
{
|
|
/* 从环形队列取出一帧(4字节),加包头AA BB后通过USB虚拟串口发给上位机 */
|
|
if (g_ringHead != g_ringTail)
|
|
{
|
|
if (g_usbTxBusy == 0U) /* USB发送空闲才可发送 */
|
|
{
|
|
uint16_t slot = g_ringTail;
|
|
g_usbPacket[0] = 0xAA;
|
|
g_usbPacket[1] = 0xBB;
|
|
g_usbPacket[2] = g_ringBuf[slot][0];
|
|
g_usbPacket[3] = g_ringBuf[slot][1];
|
|
g_usbPacket[4] = g_ringBuf[slot][2];
|
|
g_usbPacket[5] = g_ringBuf[slot][3];
|
|
g_ringTail = (uint16_t)((g_ringTail + 1U) % RING_SLOTS); /* 消费一帧 */
|
|
CDC_Transmit_FS(g_usbPacket, 6); /* 发送成功后 g_usbTxBusy 被置1 */
|
|
}
|
|
}
|
|
/* USER CODE END WHILE */
|
|
|
|
/* USER CODE BEGIN 3 */
|
|
}
|
|
/* USER CODE END 3 */
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
|
|
/** Supply configuration update enable
|
|
*/
|
|
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
|
|
|
/** Configure the main internal regulator output voltage
|
|
*/
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
|
|
|
|
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
|
|
|
/** Initializes the RCC Oscillators according to the specified parameters
|
|
* in the RCC_OscInitTypeDef structure.
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 5;
|
|
RCC_OscInitStruct.PLL.PLLN = 192;
|
|
RCC_OscInitStruct.PLL.PLLP = 2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 8;
|
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
|
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
|
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
|
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
|
|RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
|
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
|
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 4 */
|
|
|
|
/**
|
|
* @brief TIM3 周期中断回调(1ms)。
|
|
* 采集时:先装填USART2 DMA接收4字节,再发送0x00触发DAQ返回数据。
|
|
* 每次中断递减采集剩余时间,减到0自动停止。
|
|
* TX与RX使用各自独立的状态机(gState/RxState),可并发不冲突。
|
|
*/
|
|
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
|
|
{
|
|
if (htim->Instance != TIM3)
|
|
{
|
|
return;
|
|
}
|
|
|
|
if (g_acqFlag)
|
|
{
|
|
if (g_acqRemainMs == 0U)
|
|
{
|
|
/* 无剩余时间,确保停止 */
|
|
g_acqFlag = 0;
|
|
}
|
|
else
|
|
{
|
|
/* 清理上一周期未完成的接收(DAQ未应答等),避免帧错位 */
|
|
if (huart2.RxState != HAL_UART_STATE_READY)
|
|
{
|
|
HAL_UART_DMAStop(&huart2);
|
|
}
|
|
/* 先装填4字节DMA接收,再触发DAQ,确保不丢失应答首字节 */
|
|
HAL_UART_Receive_DMA(&huart2, g_uartRxBuf, 4);
|
|
HAL_UART_Transmit_IT(&huart2, &g_uartTxByte, 1); /* RS485 DE由硬件自动控制 */
|
|
|
|
/* 递减剩余时间,减到0则本次为最后一帧并自动停止 */
|
|
g_acqRemainMs--;
|
|
if (g_acqRemainMs == 0U)
|
|
{
|
|
g_acqFlag = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief USART2 DMA接收完成回调(收到4字节)。
|
|
* 将数据压入环形队列。
|
|
*/
|
|
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
|
|
{
|
|
if (huart->Instance == USART2)
|
|
{
|
|
RingBuf_Push((const uint8_t *)g_uartRxBuf);
|
|
}
|
|
}
|
|
|
|
/* USER CODE END 4 */
|
|
|
|
/* MPU Configuration */
|
|
|
|
void MPU_Config(void)
|
|
{
|
|
MPU_Region_InitTypeDef MPU_InitStruct = {0};
|
|
|
|
/* Disables the MPU */
|
|
HAL_MPU_Disable();
|
|
|
|
/** Initializes and configures the Region and the memory to be protected
|
|
*/
|
|
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
|
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
|
|
MPU_InitStruct.BaseAddress = 0x0;
|
|
MPU_InitStruct.Size = MPU_REGION_SIZE_4GB;
|
|
MPU_InitStruct.SubRegionDisable = 0x87;
|
|
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
|
MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS;
|
|
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
|
|
MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
|
|
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
|
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
|
|
|
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
|
/* Enables the MPU */
|
|
HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* USER CODE BEGIN Error_Handler_Debug */
|
|
/* User can add his own implementation to report the HAL error return state */
|
|
__disable_irq();
|
|
while (1)
|
|
{
|
|
}
|
|
/* USER CODE END Error_Handler_Debug */
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* USER CODE BEGIN 6 */
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
/* USER CODE END 6 */
|
|
}
|
|
#endif /* USE_FULL_ASSERT */
|